整模壓機

日期:2018-05-27 22:40:00 / 人氣:188

性能簡介:

壓機配備上冷卻風管、大盤冷卻系統(模底通風),機速調節范圍大,采用PLC電腦控制,液晶顯示界面操作,產品的壓制參數可實時監控和調整。液壓成型機采用比例控制系統,沖頭壓力與速度實現無級可調,沖壓位置與速度曲線柔和。


適用范圍:

主要用于玻璃碗、碟、杯子、燈罩等整體模產品的成型。


Performance profile:Equipped with cooling ducts and chassis cooling systems, such presses may be regulated within a large scope of speed. Controlled by PLC, they are operated through LED interfaces. Pressing parameters of products may be monitored and adjusted on a real-time basis. Proportional control system is utilized by hydraulic molding machines, so stepless adjustment may be made for punch pressure and speed. In the mean time, punching positions and curves are soft.


Scope of application: mainly used for molding overall products such as glass bowls, cups and lampshades.



主要技術參數:

序號

參數

指標

1

工位數

8~16

2

機速

≤55個/min ≤55 pieces/min

3

轉盤直徑

850-2100mm

4

沖壓壓力

15kN~45kN(液壓)12kN~28kN(氣壓)

5

沖壓行程

≤450mm



可選配置:
精確導料裝置、壓制后火焰整形裝置、水霧冷卻裝置、浮動橫梁、模具預熱裝置、防撞式頂出裝置、取出裝置。

作者:admin


新聞資訊 News

現在致電 電話:0572-2260917 OR 查看更多聯系方式 →

湖州和晟玻璃機械有限公司 浙江省湖州市八里店鎮八里店大橋南 電話:0572-2260917 傳真:0572-2290272
荒野行动直播